How To Cut Crown Molding For Cabinets

Adding crown molding to your cabinets is a great way to add some extra detail and style. It can also make your cabinets look a bit bigger and more expensive. Although it might seem difficult to do, you can do it yourself and this article will teach you how to cut crown molding for cabinets.

how to cut crown molding for cabinets
how to cut crown molding for cabinets

Materials You Need

how to cut crown molding for cabinets
how to cut crown molding for cabinets

If you want to cut and install crown moldings by yourself, you will need to prepare the tools and materials needed to get started. Here is a list:

  • Tape measure
  • Plywood or MDF boards in the desired width of the molding
  • Crown molding in the desired width of the molding
  • Circular saw
  • Chisels
  • Coping saw
  • Ruler or a straight edge
  • Paint or a sealant to finish the cut edges (optional)

How To Cut Crown Molding For Cabinets

If you’re looking to add a touch of elegance to your kitchen cabinets, one way to do so is by adding crown molding. Crown molding is a type of wood trim that’s placed around the top edge of cabinets, and it can help to give them a finished look. But if you’ve never installed crown molding before, it can be a bit daunting. Here’s a step-by-step guide to cutting crown molding for cabinets, so you can get the job done right:

1. Measure the width of your cabinet doors and then add about 1/2 inch to that measurement. This will be the width of your crown molding strips.

2. Cut your strips of crown molding to the appropriate width. You can use a miter saw or a hand saw for this.

3. Place the crown molding strip against the top edge of the cabinet door, making sure that the decorative side is facing out. Use a pencil to mark where you’ll need to make your cuts.

4. Make your cuts on the crown molding strips. If you’re using a miter saw, set it at about a 45-degree angle and make your cuts accordingly. If you’re using a hand saw, you’ll need to make two cuts one at a 45-degree angle and one at a 90-degree angle. These will be your outside corner cuts.

5. For the inside corners of your cabinet doors, you’ll need to make a miter cut. Set the miter saw at a 45-degree angle and make your cut.

6. Nail the crown molding in place with finishing nails. Make sure that the nails are spaced evenly apart and that they’re driven into the wood trim, not just the cabinet door.

7. Fill in any gaps between the crown molding and the cabinet with caulk or wood putty. Once it’s dry, sand it down until it’s smooth.

8. Paint or stain the crown molding to match your cabinets. Let it dry completely before putting your cabinets back together.

How To Cut Straight Pieces

First things first: you’ll need to gather your materials. For this project, you’ll need a saw (preferably a miter saw), some crown molding, and a few other tools. Once you have everything gathered, follow these steps and you’ll be well on your way to creating beautiful, professional-looking crown molding for your home:

1. Measure the length of the wall where the crown molding will be installed. Cut the crown molding to size, making sure to allow for an extra few inches on each end.

2. Use a miter box or a miter saw to create 45-degree cuts on each end of the crown molding. These cuts will allow the molding to fit snugly against the wall.

3. Install the crown molding by nailing it into place. Start at one end and work your way down, making sure that each piece is level as you go.

4. Once the crown molding is installed, use a handheld sander or power sander to smooth out any rough edges.

5. Apply caulk to the joints between each piece of crown molding, then paint or stain the molding to match your d├ęcor. Let the paint or stain dry completely before moving on to the next step.

6. Install any trim or other decorations that you may want to add, such as a crown or corbel.

How To Cut Crown Molding Corners

When it comes to cutting crown molding corners, there are a few different methods that you can use. We will discuss three of the most popular methods: miter cuts, cope cuts, and biscuit joinery.

Miter Cuts

Miter cuts are the most common way to cut crown molding corners. This method involves cutting two 45-degree angles on each end of the molding so that it fits together like a puzzle piece. To make a miter cut, you will need a miter saw.

First, measure and mark the correct angle on each end of the molding. Then, set your miter saw to the correct angle and cut along the marked line. Be sure to make test cuts on a scrap piece of wood before cutting the actual molding.

Cope Cuts

Cope cuts are another common way to cut crown molding corners. This method involves cutting a beveled edge on each end of the molding so that it fits together like a puzzle piece. To make a cope cut, you will need a coping saw.

First, measure and mark the correct angle on each end of the molding. Then, set your coping saw to the correct angle and cut along the marked line. Be sure to make test cuts on a scrap piece of wood before cutting the actual molding.

Biscuit Joinery

Biscuit joinery is a third way to cut crown molding corners. This method involves cutting a series of slots into the end of the molding so that they can be joined together with biscuits. To make biscuit cuts, you will need a biscuit joiner.

First, measure and mark the correct location for the biscuit slots on each end of the molding. Then, set your biscuit joiner to the correct depth and width settings and cut along the marked lines. Be sure to make test cuts on a scrap piece of wood before cutting the actual molding.

Once you have cut all of the necessary pieces, you can then assemble them using whatever method you prefer (glue, screws, nails, etc.). Just be sure that everything is lined up correctly before attaching it permanently.

Final Thoughts

Crown moldings are the perfect way to add a touch of elegance to your cabinets. They can be used to create a variety of looks, from traditional to contemporary. When choosing crown moldings for your cabinets, keep in mind the overall style of your kitchen. For a more classic look, opt for simple, clean lines. For a more modern look, try using different textures and colors. With a little creativity, you can use them to create a completely new look for your space.