Impact Drill For Concrete: Can You Use It?

Can you use an impact drill for concrete? Drilling into concrete can be a painful process, especially when using a hand drill. The concrete slips and breaks the bit, or drills holes that are smaller than what you need for your project. This is frustrating. However, there are tools on the market that allow you to drill into concrete with ease and get the job done right the first time.

What is an Impact Drill?

The impact drill is a heavy-duty power tool that rotates and functions similar to a conventional drill. It has an added mechanism that creates a high-torque impact. Its main purpose is for drilling into hard surfaces such as concrete, brick, and masonry blocks.

Like regular drills, it can be fitted with different types of bits such as the brad-point bit, masonry drill bits, and so forth. It produces drilling speeds ranging from 3,000-3,500 RPM to 5,500-6,000 RPM.

Though impact drills are efficient for making holes in concrete surfaces quickly and effortlessly compared to handheld drills or rotary drills, they are not without disadvantages.

How Does an Impact Drill Work?

impact drill for concrete

There are times when it makes more sense to use an impact drill. If you will be drilling a lot of holes in concrete, brick, or masonry surfaces, using an impact drill is highly recommended.

The main reason is that it won’t produce the same amount of heat as a handheld power drill. That’s why these drills are ideal for heavy-duty applications such as those mentioned earlier. You can also use an impact drill to break concrete, brick, or masonry block.

When you use an electric impact drill, it works by placing a bit on the chuck. The drill is then pressed into the material that needs to be drilled and then pulled back while being maintained at its rotational speed.

Can You Use Impact Drill for Concrete?

You can use an impact drill for concrete, but you need to know the proper ways. When drilling into thicker surfaces such as concrete, there are a few things that should be considered in order to get the most out of your tool.

  • Make sure that your bit is at least 1/16-inches wider than the hole that it will make in the concrete.
  • You can use an impact drill with a hammering motion or torque action, but it is highly recommended that you use the former instead of the latter when drilling into concrete surfaces. The problem with using impact drills with a high torque setting is that it will cause premature wear and tear on your bit and the sidewalls of your hole. This will cause the bit to wear out quickly, not to mention it may pose a safety hazard for you.
  • It is also best to use high-speed steel bits or masonry drill bits with your power tool when drilling into concrete surfaces since they are designed to withstand higher temperatures during extended periods of usage. If you don’t use bits specifically designed for these types of applications, you risk breaking the bit or having it easily get stuck in the concrete.

When you are ready to drill your hole into concrete, make sure that your power tool is properly fixed. This means making sure that the bit is secure inside the chuck. Once this is done, simply position yourself at an angle of 90 degrees over the surface where you will be drilling your hole, and maintain a consistent speed as you drill.

If possible, choose the spot where you are going to drill your hole into concrete carefully. This is because it will affect the quality of the finished project that you are working on.

For instance, if you are drilling holes for anchors or screws, make sure that these holes are made at least 1-inch away from the edges of the concrete. Concrete has a tendency to crack, especially near its edges, which will make the surface unstable. This could cause your anchor or screw to break off before it can set itself in place.

Always keep in mind that the best practice is to wear protective gear when using impact drills on concrete surfaces. That means wearing safety glasses and hearing protection to protect your eyes at all times. Always use earplugs or noise-canceling headphones if you don’t want the machine’s high-pitched noise getting in your ears and causing damage.

Also make sure that you always practice good housekeeping during your drilling session, especially if you are drilling a large area. This means keeping your workspace clean at all times and keeping the debris from getting in your way.

You can certainly use an impact drill for concrete, but you need to keep these things in mind. This will help you get the most out of your power tool and results to be more efficient when using it on various applications.

Final Thoughts

Can you use an impact drill for concrete? The answer is yes, as long as you go about it the right way and follow safety protocol to ensure that no damage is done during your project or while operating your power tool.

While you can use an impact drill for concrete, there are many things to consider before doing so. If you do not follow safety or housekeeping protocol during your drilling session, it could be detrimental to you since this type of power tool is high-powered and can cause damage if used improperly.

You should only use the right bits and attachments with your tool and its accessories, and always keep in mind that this is a powerful tool that may cause damage if mishandled.