Jigsaw vs Circular Saw: Which is Better?

Jigsaws and circular saws are both extremely versatile pieces of equipment that anyone should be proud to have in their workshop, and they can be used for a variety of tasks other than simply chopping wood.

However, as any skilled woodworker is aware, picking the most appropriate tool for the job can mean the difference between a clean and accurate completed product and a series of failed tries to achieve the same result.

In order to better understand the differences between jigsaw vs circular saw, we’ve put up this comparison article. Please continue reading!

What is Jigsaw?

Jigsaws are strong tools that use a narrow, reciprocating blade that is held under tension in a frame by a frame.

Due to the small point of the thin metal, the blade can readily cut curves and tight angles in thin wood or drywall; it can also make quick work of delicate cuts that would otherwise be time-consuming with other saws.

A jigsaw requires the operator to apply pressure to the saw’s cutting blade at its front end, then pull the blade toward them as they push the blade ahead and create their cut.

This is due to the fact that, when using these types of instruments, the sawdust and debris generated during use accumulate in front of and around the blade; if you attempt to cut away this material with the saw, you will wind up pushing it toward yourself instead (and risk cutting into your fingers).

What is Circular Saw?

A circular saw is a handheld power instrument that cuts through wood and other tough materials by slicing them with a thin, wide blade that is positioned at an acute angle.

The most common type of circular saw has an electric motor built into the handle, but there are other gasoline-powered handheld wood saws available.

The fact that circular saws rotate at such a rapid rate allows them to cut through thick materials in a fraction of the time it would take to do so with almost any other sort of cutting instrument.

As a result of their size and power, however, these saws have a larger chance of kicking back than most others, therefore the user should exercise caution when working in confined quarters.

Difference Between Jigsaw vs Circular Saw

jigsaw vs circular saw

Despite the fact that both instruments are capable of cutting vapor barriers, drywall, and thin metal sheets cleanly and fast, they operate in quite different ways and have very different characteristics.

Jigsaws are often smaller in size than circular saws, which makes them easier to use in restricted locations than circular saws.

They also provide greater control over the blade, and the thin, narrow blade of a jigsaw is less likely than the blade of a circular saw to become stuck or bind while cutting than does the blade of a circular saw when cutting.

It goes without saying that plain old-fashioned physical strength works with circular saws, and because they cut along two axes at the same time (one from front to back and one from side to side), they aren’t as restricted in what they can accomplish.

Circular saws, on the other hand, are so strong that the operator must exercise caution to avoid kicking back chunks of cut material in their direction of travel. Circular saw blades must be closely examined and maintained on a regular basis in order to remain sharp and effective for as long as feasible.

Which One is Better?

As a general rule, jigsaws are the better choice when working in tight spaces or with delicate material, while circular saws work well for cutting through stronger materials and can even be used to cut metal sheets.

However, what you gain in control with a jigsaw, you lose in power — and vice versa.

If you need a tool that will slice cleanly through metal or thick plywood, a circular saw will do the job faster and more effectively.

But if you need something for cutting curves and tight angles in thin material or drywall, a jigsaw is definitely up to the task.

Regardless of which tool you use, take your time and always be mindful of what you’re cutting so you can avoid injury.

How To Choose The Right Saw For You?

Choosing the right saw is important if you want to get your job done quickly and efficiently.

There are several factors that contribute to which type of saw is best for a specific project.

Price, size, triggers location, blade adjustments, safety features are all things to consider when buying any power tool.

A saw with an easy blade change and easy-to-read measurements may be the best choice for the novice whereas a saw with more power and safety features such as a blade break or being able to lock the trigger down would be beneficial for a contractor.

There are many different types of saws on the market that all have their own set of pros and cons, but over time you will find the right saw for you.

You can also read: A Guide On How To Use A Tooth Saw

Final Thoughts

A jigsaw is a better option when working in tight spaces or with delicate material, while circular saws can be used to cut through more robust materials and even metal sheets. What you gain in control with a jigsaw, you lose in power – and vice versa.

When choosing a saw, the most important thing is to take your time and figure out what you’ll be using it for most often. Price, size, safety features are all factors that will determine which power tool is best for you.

It may take some trial and error by trying out different types of saws to find the right one for you, but in the end, it will be worth it.