A circular saw blade sharpening is one of the most important pieces of woodworking equipment that you will need in your workshop. The blade of the tool gets dull with time, thereby affecting the quality of cuts produced.
To assist you in obtaining smooth cuts, therefore, professional saw blade sharpening should be taken into account. Furthermore, because this extends the life of the blade and prevents you from having to replace it frequently, it is absolutely vital.
How would you sharpen a circular saw blade, exactly? What are some of the ways that will help you accomplish it properly? There’s no need to be concerned! I created this tutorial to give you a step-by-step procedure for sharpening circular saw blades. Let us get started.
DIY Circular Saw Blade Sharpening
“Just Do It” Does not Apply
DIYers are often regarded as people who believe they can achieve everything, but a sharp circular saw blades without the help of a professional should be met with some caution. This is especially true for high-quality blades of carbide, which are designed in such a manner that you must be meticulous when using the sharpening tools to avoid harming the surface.
Sharpening blades are technical expertise that must be learned and honed through practice and experience. You run the danger of permanently destroying or damaging your blades if you attempt blade sharpening based on a YouTube video or instructions from a book.
If You DIY, Make Sure You DIR
Of course, you may learn how to sharpen circular saw blades yourself. It just takes a lot of effort and practice. Anyone who wants to sharpen expensive blades should seek out a teacher or mentor that will show you how in a controlled setting. You will not only learn the necessary procedures and methods, but you will also get some valuable knowledge using the proper tools and equipment.
If you don’t have the blades that need to be sharpened, bring them to a trustworthy sharpening facility and ask what you can do to learn more about how to sharpen them yourself.
Buy Higher-Quality Blades
Not only are LUXITE carbide-tipped circular saw blades made of strong materials that keep their edge for a long time, but they also require less maintenance. A carbide-tipped circular saw blade is manufactured from exceptionally strong materials and keeps its edge for a long time. These blades eliminate the need to re-tip or re-sharpen them and require no additional replacement of damaged blades.
If your saw’s blade is ragged and keeps cutting poorly after you sharpen the blades, it’s probably time for a new one. Luxite’s saw blades are recognized for being exceptionally long-lasting and producing crisp cuts.
Is It Worth To Sharpen Circular Saw Blades?
Before we go further, is it really required to sharpen circular saw blades? Why don’t you just get a new one when the old one gets dull? Circular saw blades are rather expensive.
If you are cutting a lot of material, it is inevitable that the blade becomes dull. This implies that you won’t be able to replace the blade when it gets rough. You may sharpen the blade and make it as good as new. As a result, it’s critical to sharpen your knife since doing so will extend its lifetime.
Circular saws with carbide-tipped and steel blades can be sharpened. Carbide is now widely used in blade construction, thus most blades require expert sharpening.
So, how many times you can sharpen a saw blade? This is determined by the type of blade you have. Some blades may be re-sharpened up to three times in as little as three years with proper maintenance and care.
However, I must add that not all blades may be sharpened. The professional who is sharpening will almost certainly be able to identify blades that can’t be sharpened, so they aren’t worth the time or money.
Some blades are simply too inexpensive to be re-sharpened. When they reach this point, you’ll need to replace them with a new one.
A Step-By-Step Guide To Sharpening Circular Saw Blades
You must now be aware of the warning signals that indicate a dull saw blade, and the next step is to figure out how to do sharpening a dull circular saw blade. You can either use a Dremel to sharpen a circular saw blade or hand-sharpen a big circular saw blade when it comes to sharpening circular saw blades.
Remove The Blade
When the blade is in the tool, you can’t sharpen it. For sharpening purposes, you must remove the blade from the gadget. This is a straightforward procedure that may be completed in less than a minute. The majority of saws include a release button to make your job simpler. To release the bolts on previous versions, you would need to use a wrench.
Secure The Blade
Place the vice grip on top of the steel rod and secure it with a wrench or pliers. As you tighten it, make sure that the handle is facing upwards and that it’s touching your hand. Don’t squeeze too hard because you risk bending the metal holding the teeth.
Make a mark on the top side of the blade. This is significant since it will let you know when you’ve covered all of the area surrounding the blade. It will also prevent double sharpening by preventing you from sharpening two times in a row.
After every two-blade point, however, there is a bevel on the side facing you. You need to understand saw blade circular sharpening angles at this time. After that, grab your file and hold it at about 20 degrees from the bevel.
Consider The Bevels
This is another point to consider since all blades have beveled edges. You may skip one blade and proceed to the next beveled edge. Repeat this procedure for each additional blade (up to six) until you’ve completed around the blade with similar strokes as you did on the first blade.
Turn The Blade
You’ll need to repeat everything you just did on the other side of the blade. Follow all of the steps in step three again. In addition, you’ll need a marking so that you can recall where you began.
File The Tips
On all the tips of each booth, do this. You don’t have to apply many strokes. To prevent wear, run the file back and forth rather than rubbing it in one direction. This is also done on the blade’s edge.
Install The Blade
Once you’re done sharpening, replace the vice grip’s blade and return it to the saw. Your blade is now razor-sharp, so you can make accurate cuts with it.